|
|
|
 |
|
 |
Application
|
| Paper ,
Plastic Film Sheet , Non-woven fabric , Metal foil , Resin/
Adhesive coating , Various paint coatings , Laminated material |
Feature
|
|
- Comparable
level is achieved with the use of soft X-rays, instead of
using beta ray.
- No qualified operator.
- No need for calibration ray.
|
|
-
Very precise
The driving
mechanism of the X-ray tube and sensor utilizes a
servomotor, a ball screw, and LM guide. X-rays are not
affected by particle, diffusion, etc. when gauging
material thickness. Repeating accuracy has been realized
by the light sensor. |
|
-
Safe and sound
Soft X-rays
radiation stops only by turning OFF a power supply.
Moreover, it does not have any negative influence on a
human body during normal operation. Although qualified
operators is unnecessary, written application is required
for the local Labor Standards Supervisory Inspection
Offices in the area. |
|
-
Operator friendly
Since using MS
WINDOWS, operation, data analysis, networking, and
graphical interface are very user friendly. |
|
-
Light in weight and compact in size
The X-ray tube,
receiving sensor, and the driving system are very compact. |
|
Measurement
theory
|
| The
law of an X ray penetration |
| I=Io*EXP(-A*T) |
T=
Thickness of measurement material
A= The absorption coefficient of object material
Io= Intensity of a signal when no object material between
sensors
I= Intensity of a signal when object material between
sensors
|
| As
shown in the above figure, the magnitude of absorption of
object material is measured, and thickness is measured by
correlating it. |
|
Measurement
area
|
 |
.
|
|
| With
the use of ball screws, servomotor, and LM guide for the
scanning head movement, it's XY position is guaranteed to
be of high accuracy. |
|
|
| For Futec
machine sales please contact: |
| Robert
Krause: 704-393-0314 ext 585 /
Email: rkrause@texmacusa.com |
|
|
| For
Futec technical support please contact: |
|
|
|
|
|
to order parts for your Futec please
contact:
|
|
Texmac Parts Dept: 877-335-5206
Customer Service: Mark Brown ext 561 or Joli Blend ext
572
Parts Manager: Doug Ritch ext 559
|
|
|
