|
|
|
Click here to go
back to the Accessories page
|
|
Click on an icon below to jump to a different
accessories page: |
|
|
|
Click on a link below if you need to jump to a
particular section on this page: |
|
Thread and Bobbins
Needles and
Scissors Backing and Topping 3D
Embroidery Foam
Pressure Feet, Bobbin Cases, & Misc. Supplies
NEW -> Design Transfer Options
|
|
|
|
See An Online Thread Color Chart !!!
Click HERE to see an online thread
chart sorted by color number.
|
|
High
Sheen Polyester thread in 5000 meter cones in hundreds of rich
colors!
|
|
More on our Rapos Thread
RAPOS manufactures a quality, strong 120D 2-ply 880-gram tensile strength
thread. All RAPOS colors are filament dyed.
None are
post-processed. Because there is no over-dyeing, you get strong,
quality thread for all colors, without variance from lot to lot.
RAPOS thread has a high sheen for exceptional color and brilliance; it has
the silk like shine of rayon and silk thread, yet with all the benefits of strength and
durability of polyester thread.
|
|
|
|
Rapos Starter Thread Kit
30 of the 2,000 Meter polyester starter thread cones to give a good
selection of colors for your start up embroidery operation
Contains 1 each the following colors:
1, 101, 106, 111, 115, 116, 117, 129, 203, 205, 206, 315, 323, 340, 354,
395, 405, 409, 417, 508, 510, 533, 615, 707, 900, 1123, 1208, 1430, 1713,
1717
Please use our online thread chart and look
for the colors marked in RED to see exactly
what colors come in the Starter thread kit.
RAPOS Metallized Thread (sews like polyester - because it is !!!)
RAPOS 100D 2-ply,
Mylar-wrapped thread has the look and shine of traditional metallic
threads. However, with its core of 2-ply polyester thread, it sews
as easily as non-metallized thread. Get the look of metallic without
the sewing hassles of traditional metallic thread! Oversized needles
are not needed. Fewer thread breaks! This item is a real problem
solver!! 880 gram Tensile Strength ! ! !
About Our Metallic Colors
Our metallic thread is a mylar-wrapped polyester that runs through the same
needle as standard 40-weight polyester and rayon embroidery thread! You
can run it at higher speeds than traditional metallics, saving you a lot of
time! In addition, you'll find our prices are very competitive for
both our polyester and metallic thread !
|
|
|
|
Click HERE to see an online thread
chart sorted by color number.
|
|
|
|
100% Spun Acrylic Variegated Prism
Thread
|
|
|
|
Click here
to go the Prism Thread page.
|
|
|
|
Pre-Wound Embroidery
Bobbins
|
|
 |
|
Pre-Wound Embroidery
Bobbins
|
|
|
White Fil-Tec Magnetic Core Bobbin Poly Continuous Filament 135 yards each |
box of 100 (part# - mag bobbin w )
|
|
Black
Fil-Tec Magnetic Core Bobbin Poly Continuous Filament 130 yards each |
box of 100
(part# - mag bobbin b )
|
|
White
Truesew Poly Continuous Filament Cardboard Side Bobbin 132 yards each |
box of 144
(part# -
embroidery bobbin)
|
|
White
Truesew Poly Continuous Filament Cardboard Side Bobbin
132 yards
each |
pack of 36 (part# -
36-embroidery bobbin)
|
|
White
Continuous Filament Poly Cardboard Side Bobbin
132 yards each |
box of 144 (part# - mim bobbin)
|
|
Black
Truesew Poly Continuous Filament Cardboard Side Bobbin
132 yards each |
box of 144 (part# - 15-L / 132 black)
|
|
White
Spun Poly With Cardboard Side Bobbin
114 yards each |
box of 144
(part# - 120-L / 114 white)
|
|
|
Click here to go back to the
top.
|
|
|
|
|
|
Groz-Beckert & Organ Embroidery Needles
|
| Part
Number |
Needle Size and
Type
|
| |
Light ball
point for unstable fabrics- Knits, Reverse Fleece
|
|
10-DBXK5-FFG
|
75/11
Light ball point 10 Pack Perfect for 40 weight
thread
|
|
DBXK5-FFG
|
75/11
Light ball point 100 Pack Perfect for 40 weight thread
|
|
GB-DBXK5-FFG
|
Titanium
Nitride Coating- 75/11 Light ball point -Longer Life
|
| |
Sharp
point for stable fabrics - Wovens, Caps, Etc.
|
|
10-DBXK5-75
|
75/11
Sharp point 10 Pack
Perfect for 40 weight thread
|
|
DBXK5-75
|
75/11
Sharp point 100 Pack Perfect
for 40 weight thread
|
|
GB-DBXK5-75
|
Titanium
Nitride Coating- 75/11 Sharp Point Longer Life
|
|
DBXK5-80
|
80/12
Sharp Point - Thicker shank, larger eye
Use when breakage of 75/11 Sharp occurs
|
|
GB-DBXK5-80
|
Titanium
Nitride Coating- 80/12 Sharp Point Longer Life
|
| |
Narrow Wedge
Point for light leather
|
|
DB-K5SS
|
75/11
Narrow Wedge Point (made by Organ)
|
|
To see a listing of recommendations on what
needles and stabilizers to use with different materials
Please click HERE.
|
|
Embroidery Scissors
|
|
4" Curved Tip
Titanium Scissors (PN: Embroidery Scissors)
|
|
|
4" Snips
|
|
4" Snips (Part
Number: SNIPS)
|
|
|
8" Titanium Bent Handle Backing Scissors
|
|
(Part
Number: Backing Scissors)
|
|
|
Click here to go back to the
top.
|
|
|
|
|
|
There is more than
1 way to get your designs from the computer to the machine!!!
|
|
Flash Card /
Adapter for HCS/HCD
|
|
256MB
Compact Flash Card (Requires
one Compact Flash Adapter to operate)
|
|
Using Flash-type
memory cards (the same kind found in many digital cameras) is a
fast, convenient way to transfer designs into the HCS
Voyager, HCD & HCR machines. While we have seen
cards up to 1Gb (1024Mb) work well, the official recommendation is
256Mb max, which is still large enough to hold thousands of average
and large sized designs. (Requires one Compact Flash Adapter to
operate)
to download a tip sheet on the flash card and adapter Click HERE
|
| Compact
Flash Adapter (one
required per machine) |
|
You'll need a PCMCIA
Compact Flash adapter "sleeve" that the card fits into.
This adapter "sleeve" allows the card to be inserted into
the type of removable card slot found in laptops, which is the kind
of slot on the side of the Voyager control panel where the card must
be inserted.
(note, the card CAN be inserted and/or removed while the machine is
powered on and while sewing -
just don't do this while a design is being transferred!) for the HCS
Voyager, HCD & HCR machines.
|
|
USB Memory
Flash Drive
|
| NEW->
Jump
Drive -
1 Gigabyte USB memory flash drive |
|
Many
of the latest HCD & HCR Happy machines can use a USB Jump Drive
( also called a memory stick or flash drive ).
The 1 GB Jump Drive will hold 4 times the amount of the 256mb Flash
Card.
|
|
Direct
Connect Cable
|
| NEW->
CSC-25
-
25 ft Cross-Serial cable for the HCA and HCG
embroidery machines |
|
No
more floppy disks for your HCA or HCG Machine!!!!!
You can connect you machine directly to your computer using
this direct connect cable and the Happy Link software (version 3.05)
that you can download for free from happyemb.com. Click
Here
Click HERE
to download instructions for installing and using this cable.
|
|
Click here
to go back to the top.
|
| |
|
|
|
|
|
Cutaway Backings - Perforated
Roll
Part Number -
Weight and
Size
|
|
C498-7.5 x 7.5
- 3.0 Oz Cutaway 7.5" x 7.5" White Perforated on a 100 yd roll
|
|
C498-23 x 20
- 3.0 Oz Cutaway 23" x 20" White Perforated on a 25
yd roll
|
|
C824-14.75x14.75
- 2.0 Oz Cutaway 14.75" x 14.75" White
Perforated on a 100 yd roll
|
|
C315-7.5 x 8
-1.5 Oz Mesh Cutaway 7.5" x 8" Perforated on
a
100 yd roll
|
Cutaway Backings - Die Cut
Sheets
Part Number -
Weight and
Size
|
| 3ozC
- 3.0 Oz Cutaway 7.5" x 7.5" Die Cut 50 Pack White |
Cutaway Backings - Continuous
Roll
Part Number -
Weight and
Size
|
| 3ozCW
- 3.0 Oz Cutaway 23" x 12 yd roll White Continuous roll
(non-perforated) |
| 3ozCB
- 3.0 Oz Cutaway 23" x 12 yd roll Black Continuous roll
(non-perforated) |
| 2ozC20X25
- 2.0 Oz Cutaway 20" x 25 yd roll White Continuous
roll (non-perforated) |
Tearaway Cap Backings - Die Cut
Sheets
Part Number -
Weight and
Size
|
|
25ozT50
- 2.5 Oz Tearaway for Caps 4" x 19" Die Cut 50
Pack
|
| 25ozT250
- 2.5 Oz Tearaway for Caps 4" x 19" Die Cut 250
Pack |
|
T611-4 x 7
- 2.5 Oz Tearaway for Caps 4" x 7" Die Cut 500 Pack
|
Tearaway Backings - Perforated
Roll
Part Number -
Weight and
Size
|
|
T633-7.5 x
7.5 - 1.8 Oz Tearaway 7.5" x 7.5" Perforated
on a 100 yd roll
|
|
T633-14.75 x
14.75 - 1.8 Oz Tearaway 14.75"
x 14.75" Perforated on a 100 yd roll
|
Tearaway Backings - Die Cut
Sheets
Part Number -
Weight and
Size
|
| 18ozT
- 1.8 Oz Tearaway 7.5"
x 7.5" Die Cut 50
Pack |
Tearaway Backings - Continuous
Roll
Part Number -
Weight and
Size
|
|
T678B
- 1.5 Oz Tearaway 23" x 25 yd roll Black Continuous roll
(non-perforated)
Great for use with color sensitive
projects
|
Adhesive Tearaway Backings - Continuous
Roll
Part Number -
Weight and
Size
|
|
PNT 10x25
- 1 Oz Adhesive Tearaway 10" x
25 yd roll White Continuous roll
(non-perforated) with release paper for use with Hooptech
Quick Change or Fast Frames. Adhesive backing eliminates the need for water
activated adhesive stabilizers or spray adhesives. *
|
|
* Please
use Hookwash on a
regular basis when using a sticky backing. If you are not
using Hookwash as a part of your
regular maintenance, expect a build up of adhesive residue in your
rotary hook, which will cause service issues.
|
Tearaway / Washaway Backings - Continuous
Roll
Part Number -
Weight and
Size
|
|
EB160
- 2 Oz Tearaway / Washaway 8" x 10 yd roll White Continuous roll
(non-perforated)
Ideal for towels & linens,
disappears after washing!
|
Water Soluble Toppings
Part Number -
Weight and
Size
|
|
Solvy-8x8 - Water
Soluble Topping 8" x 8" Perforated on a 110 yd
roll
|
| 2012S
- Water Soluble Topping 20"
x 12 yd continuous roll (non-perforated) |
| WS20X25
- Water Soluble Topping 20"
x 25 yd continuous
roll (non-perforated) |
|
|
|
|
All Tearaway & Cutaway Backings are manufactured
employing the wet-laid process, insuring multi-directional stability and
uniform density. Great Embroidery starts with excellent stabilization!
|
|
Click here to go back to the
top.
|
|
|
|
|
|
Make
your embroidery come to life by using
puffy embroidery foam under your design to
give it a cool 3-D effect.
Embroidery Foam comes in 2mm and 3mm thickness on
12 by 18 sheets
|
|
|
|
To
download a page with tips for using Embroidery Foam click HERE
|
|
Click here to go back to the
top.
|
|
|
|
|
|
Tools
|
|
TWE6 Deluxe 6" Bent Tweezers
|
|
TWE3 4" Tweezers
|
|
4" curved Titanium Embroidery
Scissors
|
|
4" snips SNIPS
|
|
8" Titanium Bent Handle Backing Scissors
|
|
M0404342 17.5 Needle Depth Gauge
|
|
TTG - Top Thread Tension Gauge (for accurately determining
correct upper thread
tensions)
(No More Guessing)!! TTG
Instructions click HERE
|
|
BTG
- Bobbin Case Tension Gauge (Place Bobbin Case with thread into device for determining correct bobbin
thread tension) BTG Instructions click HERE
|
|
|
|
Oils, Adhesives, etc.
|
|
ZS011
Needle Oiler with plastic extension tube. ( replaces the
EF1 )
|
|
KK100
Spray Adhesive for appliquι and maximum registration. ( replaces the
505 )
|
|
LB5 Spray Lubricant for hassle free
oiling (non staining)
|
|
LOCTITE
Medium
Strength (Blue) Thread Locker 2.5ml bottle
Keeps screws, nuts and bolts securely fastened
|
|
HOOKWASH Lubricant
/ Solvent spray for removing residual adhesive from needle & rotary
hook from use of sticky backings or adhesive sprays. Spray on new rotary
hooks to remove preserving oil before regular oiling. Please click HERE
to download tips on using Hookwash.
|
|
|
|
Thumb Screws for Cap
Drivers
|
|
HCS43141 Knob Bolt ( with thumbscrew ) for HCS
Voyager new style cap driver
|
|
HCD37090 Silver Thumb Screw for HCD cap driver
|
|
M0437002 Blue Thumb Screw for
Happy HCA/HCG/HCM/HMF - does not work on HCS or HCD
|
|
(makes switching
between cap & tubular sash a snap !)
|
|
|
|
Bobbins/Bobbin Cases
|
|
MPZ00080-T
Towa "L Style" Bobbin
Case (for HAPPY HCA/HCG/HCM/HMF) (replaces MPZ01810) The Industry
Standard Japanese made OEM Best quality & performance (does
not work on HCS, HCD or HCR)
|
|
MPZ00080 Bobbin Case (for HAPPY
HCA/HCG/HCM/HMF) (replaces MPZ01810)
|
|
HSA04030 Bobbin Case (for HAPPY HCS,
HCD and HCR)
|
|
MPZ00550 Metal Bobbin (for use
when winding your own bobbins)
|
|
ABLS Anti-backlash Spring (for use
with MPZ00550 when winding your own bobbins)
|
|
|
|
Rotary Hooks
|
|
MPZ01290 Stainless Steel Hook (non-Teflon)
(requires daily oiling) (for HAPPY HCA/HCG/HCM/HMF)
|
|
HSA04010 Stainless Steel Hook (non-Teflon)
for HCS, HCD and HCR Only!
|
|
MPZ01260 Teflon Hook (does not
require oiling) (for HAPPY HCA/HCG/HCM/HMF)
|
|
|
|
Presser Foot (Please refer to
your parts manual for correct part number)
|
|
HCB13200
Presser foot for HCS Voyager
machine, 2 mounting holes
|
|
HCB13380 Presser foot for HCS Voyager
machine, 3 mounting holes
|
|
SNR13130 Presser
foot for HCD machine (replaces HMG13630)
|
|
HMF12300
Presser foot
|
|
HMG12750
Presser foot (4mm dia eye, replaces HMG912060)
|
|
M0412234
Presser foot
|
|
|
|
Peggy's Stitch Eraser
|
|
Peggy's Stitch Eraser
- removes unwanted stitches quickly!
|
|
2078 Replacement Blade
- have a spare to replace original
|
|
|
|
Thread Netting
|
|
Thread Netting - Pack (15),
4"
each piece -Perfect size for Rapos-
|
|
Thread Netting - Yard (cut it yourself for
various types of thread)
|
|
|
|
Plastic Spring
|
HSA20010
to be used on HCS. One per cone to hold thread cones firmly against
the felt - this helps prevent thread breaks
(12 required per machine) to be mounted on Thread Stand Pin before
placing the cone of thread
|
|
|
|
Abrasive Cord
|
|
Abrasive Cord - 12 Foot Spool of
Sandpaper On A String for deburring needle scratches on Presser Feet and
Needle
Plates
|
|
|
|
Embroidery Touch Up Pens
|
|
Touch Up Pens
Set of 8 primary colors (black, blue,
brown, green, orange, purple, red and yellow) fine point for embroidery
application
|
|
|
|
HCS Voyager Tool Kit
|
|
Tool Kit for HCS - contains - 1 - #2 phillips screwdriver; 1 -
3mm allen wrench; 1 - 2.5mm allen wrench;
1 - 90deg straight blade
screw driver; 1 - 2mm straight blade screwdriver; 1 - M0404342 needle depth gauge; 1 - replacement lever handle; 1 - fuse 6A; 1 - small
cleaning brush; 10 - 75/11 light ballpoint needles
|
|
|
|
Helicoil Kit
10 Replacement Helicoils and insert tool to repair damaged threads on
the Happy HCA, HCG and HCM Tubular and Cap Sashes.
|
|
|
|
Front Cover for HCS Voyager
|
HCBU12140
Tinted Plastic Front Thread Cover with Metal Hinge ( close up of hinge
)
( replacement for the HCB16464 ) Installation instructions in pdf format click HERE
|
|
|
|
Flash Card / Adapter for HCS/HCD
|
|
256MB Compact Flash
Card (Requires one Compact Flash Adapter to operate)
|
|
Using Flash-type memory cards (the same kind found in many digital
cameras) is a fast, convenient way to transfer designs into the HCS
Voyager, HCD & HCR machines.
While we have seen cards up to 1Gb (1024Mb) work well, the official
recommendation is 256Mb max, which is still large enough to hold
thousands of average and large sized designs. (Requires
one Compact Flash Adapter to operate)
to download a tip
sheet on the flash card and adapter Click HERE
|
|
Compact Flash
Adapter (one required
per machine)
|
|
You'll need a PCMCIA
Compact Flash adapter "sleeve" that the card fits into. This adapter "sleeve" allows the
card to be inserted into the type of removable card slot found in
laptops, which is the kind of slot on the side of the Voyager
control panel where the card must be inserted. (note, the card
CAN be inserted and/or removed while the machine is powered on and
while sewing -
(just don't do this while a design is being
transferred!) for the HCS
Voyager, HCD & HCR machines.
|
|
USB Memory Flash Drive
|
|
NEW->
Jump
Drive -
1 Gigabyte USB memory flash drive
|
|
Many of the latest HCS, HCD & HCR Happy
machines can use a USB Jump Drive ( also called a memory stick or flash
drive ). The 1 GB Jump Drive will hold 4 times the amount of the 256mb
Flash Card.
|
|
Direct Connect Cable
|
|
NEW->
CSC-25
-
25 ft Cross-Serial cable for the HCA and HCG embroidery machines
|
|
No
more floppy disks for your HCA or HCG Machine!!!!!
You can connect you machine directly to your computer using this
direct connect cable and the Happy Link software (version 3.05) that you
can download for free from happyemb.com.
Click HERE
to download instructions for installing and using this cable.
|
|
|
|
HCS / HCD Embroidery Machine Stand
|
|
|
|
|
Click here to go back
to the Accessories page
|
| |
